Chris,
A list of things to consider (I'm just completing my front end rebuild).
- Good Parts suspension bushings have gotten excellent reviews (be sure
to use plenty of antiseize compound to prevent squeaks)
- purchase all new hardware; castle nuts, nyloc nuts, bolts and washers
- new ball joints and tie rod ends
- replace boots on inner ball joints
- new spring seats
- replace trunnions
- Spax shocks have gotten good reviews and are adjustable while on the car
- replace bearings and races on front hubs
- cut brake rotors while the hubs are off the car
Good luck with this. Write if you hit any problems.
Peter Macholdt
TR250
>Hello everyone. As I'm getting ready to order some suspension parts I am
>wondering what else I should replace. As of right now I am ordering-
>front and rear bushings,
>front and rear springs,
>steering rack mounts,
>rubber upper steering joint,
>front shocks (anyone have any preferences for these?),
>rear levers are getting rebuilt,
>link kit for levers to the trailing arm.
>
>As you can see I'm getting ready to spend a little dough and would like to
>do this right. Am I missing anything obvious? What about rack components,
>inner, outer tie rods etc?
>
>Any advice would be much appreciated,
>Chris Kincer
>73 TR6
>Lexington, KY
>
>
|