Re: [Healeys] Oil plug washer

[john spaur <jmsdarch@sbcglobal.net>]

25/32" ID, 1-3/32 OD, .06 thick. Take your plug down to the hardware store.

John

At 06:03 PM 4/27/2012 +0000, Bob Spidell wrote:
> I think it's 3/4" ID (hopefully, someone can un/confirm).
>
> Or, you can just anneal the one you have: heat it to 'cherry red' 
> with a propane torch and let cool. Will seal as good as new.
>
> Bob
>
>
> --------------------------------
> Bob Spidell - San Jose, CA
>
> ----- Original Message -----
>
>
> Can someone give me the dimensions for the copper washer used to seal the oil
> drain plug on BN7? I need a new one and don't have time to order from Moss.
> I assume I can get one of the proper size locally.
>
> Thanks,
>
> Ron Fine
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/healeys/mharc@autox.team.net